Concrete repair and grouting system
A three-component polymeric material for the repair and rebuilding of concrete and stonework damaged by iMPact, wear, chemical and environmental attack, as well as for grouting and bonding applications. This non-shrinkage material offers outstanding abrasion and chemical resistance, high mechanical and iMPact strength, simple application procedures and quick curing times.
Concrete resurfacing system
A two-component polymeric material for resurfacing and protecting large areas of concrete, stone and other surfaces. This non-shrinkage material provided excellent protection to concrete from the effects of iMPact, abrasion and chemical attack. It can be feather-edged and allows for a simple application procedure and quick curing times.
Lightweight vertical/overhead concrete repair system
A two-component, lightweight , polymeric material specifically designed for rebuilding severely damaged or worn overhead or vertical concrete and stonework surfaces. This non-porous system can be applied up to 127mm (5 inches) thick on vertical surface and up to 76mm (3 inches) thick on an overhead surface with minimal support during application..
Concrete protection system
A two-component clear amber resin system for protection of masonry and metallic surfaces. This non-porous system provides a tough, seamless layer suitable for heavy duty dust proofing and protection against moisture ingress. It can also be used for bonding and grouting applications.
Resin system for repairing and filling gaps on concrete
A two-component, clear amber resin system designed to be used with various aggregates to repair and fill gaps on concrete and stonework damaged by iMPact, vibration, chemical and environmental attack. This resin system provided a cost-effective solution for large volume repairs.
Heat/acid resistant concrete repair system
A three-component , trowelable material for the repair and protection of concrete, stone and other rigid surfaces subject to iMPact and abrasion. This repair system is designed for resistance to inorganic acids and heat, providing outstanding adhesion, strength and hardness. The material may be applied on vertical surfaces up to 6mm (1/4 inch) thickness.
Chemical resistant rebuilding system
A two-component paste grade material with outstanding resistance to a broad range of chemicals, especially acids and alkalis. This material is ideally suited for rebuilding surfaces damaged as a result of chemical attack and for repairing and rebuilding damaged chemical resistant linings. It can also be used for profiling and fairing rough surfaces prior to the application of Belzona 4311 (Magma CR1).
Barrier coating system for acids and alkalis
A high performance, two-component barrier coating with outstanding resistance to a broad range of chemicals, especially acids and alkalis. The system isolates concrete and metal substrates from deteriorating chemical environments.
Barrier coating system for hot organic acids
A high performance, two-component barrier coating optomised for resistance to hot organic, such as acetic acid, but also providing excellent resistance to a broad range of chemicals. The system isolates concrete and metal substrates from deteriorating chemical environments.
Barrier coating system for hot inorganic acids
A high performance, two-component barrier coating optimized for resistance to hot inorganic acids, such as sulphuric and hydrochloric acid. The system isolates concrete and metal substrates from deteriorating chemical environments.
Chemical resistant coating system with static dissipation properties
A two-component static dissipative barrier coating with outstanding resistance to a broad range of chemicals, especially acids and alkalis. This coating system is designed to transfer surface build-up of electrostatic charge away from hazardous areas.
Chemical resistant, flexible barrier coating system
A two-component, flexible barrier coating offering outstanding resistance to a broad range of chemicals, especially acids and alkalis. This coating system is ideally suited to protect chemical containment areas, remaining intact in the event of concrete cracking underneath due to its superior flexibility.
Safety grip system for non-slip surfaces
A three-component system consisting of a coloured thixotropic base, liquid solidifier and aluminum oxide aggregate, designed for the creation of durable non-slip surfaces on concrete, steel, quarry tile or wood. The system is provided in grey and safety yellow and offers excellent adhesion, wear and chemicals resistance.
Elastomeric sealing system for building and expansion joints
A two-component fluid elastomeric system designed for sealing horizontal building and expansion joints. This high-performance material accommodates to +/- 25% movement and provides excellent weather resistance, adhering strongly to most surfaces, including concrete, stone and steel.