Protective coating with aesthetic properties
A two-part modified urethane system for protecting metallic and masonry surfaces against chemical, abrasive and corrosive attack. The system produces a coating of extreme hardness, durability and chemical resistance, yet giving a highly decorative, non-toxic surface, which is easy to clean by commonly used cleaning agents.
Clear water repellent treatment for masonry surfaces
A masonry treatment in the form of an aqueous penetrating liquid which, when applied to porous surfaces, forms an invisible, micro-porous and water repellent barrier with the substrate. The system is supplied as a concentrate for dilution with water prior to use. It maintains the natural appearance of the substrate, while preventing spalling and cracking of surfaces such as concrete, stone and brick, and reducing dirt retention.
Weatherproofing and waterproofing protective coating
A single component waterproofing coating designed to protect external and internal walls and structures from damage caused by aggressive industrial, marine and natural pollutants, whilst reducing dirt retention. This flexible material offers outstanding elasticity, weather resistance and ultraviolet radiation protection, and its elf-cleaning properties ensure that the appearance of the treated surfaces is maintained.
Heavy duty protective coating for flooring areas
A two-component coating, incorporating a non-slip aggregate, for the protection of flooring areas where chemical and abrasion resistance are required. This durable coating reduces health and safety risks due to its positive grip properties and is available in a range of colours including dark grey, light grey and bright yellow for improved visibility.
Barrier coating for operation under immersion
A two-component coating applied by brush of spray for protection of metallic and non-metallic surfaces operating under immersion conditions in contract in contact with aqueous solutions up to 500C (1220F). This coating offers excellent corrosion resistance and protection against a wide range of chemicals as sea water and crude oil.
Barrier coating approved for contact with potable water
A two-component coating applied by brush or spray for protection of metallic and non-metallic surfaces operating under immersion conditions in contact with water and aqueous solution up to 400C (1050F), when potable water approval is required.
Barrier coating approved for contact with potable water
A two-component coating applied by brush or spray for protection of metallic and non-metallic surfaces operating under immersion conditions in combination with Belzona 9241 aggregate to create a drinking water approved concrete rebuilding system for heavily damaged vertical and horizontal surfaces.
Erosion-corrosion resistant barrier coating
A two-component ceramic filled coating designed to provide erosion-corrosion protection and chemicals resistance for equipment operating under immersion in aqueous solutions up to 500C (1220F)). This high performance material can be easily applied by brush or spray to virtually any metallic and non-metallic surface.
Moisture tolerant barrier coating system
A two-component coating applied by brush for protection of metallic and non-metallic surfaces operating under immersed conditions in contact with aqueous solutions. This moisture tolerant material is specifically designed for application to wet and oil contaminated surfaces that cannot be dry for application, as well as for underwater applications. The coating displaces water from the surface, ensuring maximum adhesion to damp o9r wet surfaces, even underwater.
Heat activated coating system for ICU prevention
A two-component coating for protection of steelwork subject to Corrosion under Insulation (CUI). This heat activated material can be brush applied directly onto hot Surfaces from 300C (860F) to 800C (1760F) with minimal surface preparation required, avoiding production downtime.
Heat activated coating system for CUI prevention
A single component coating for protection of steelwork subject to Corrosion under Insulation (CUI). This heat activated material can be brush applied directly onto hot surfaces from 700C (1580F) to 1500(3020F) with minimal surface preparation required, avoiding production downtime.
Elevated temperature barrier coating
A two-component high temperature coating applied by brush or heated airless spray for protection of metallic surfaces operating under immersion in aqueous/hydration systems up to 950C (2030F). This high performance material provides excellent corrosion protection at elevated temperatures and is resistant to a wide range of chemicals. It exhibits low surface bloom and excellent inter-coat adhesion, enabling two-coat application without the need for frost blasting between coats.
Copyright © 2022 Apollo Engineering & Belzona - All Rights Reserved.
Powered by GoDaddy